Osmo Olie-Beits 0,5L

The appearance and adhesion of our products may vary by wood species, surface and application method. We therefore recommend testing products on a sample first.

1. Stir the product well for 2 minutes. After opening the tin, the oil and wax are separated.

For a 0.5 L tin, shake the product well for 2 minutes.

2. Apply the first coat of Oil Stain with a white pad, Easy Pad or lint-free cloth to the new or sanded wood.

3. Within 20 minutes, buff off excess product along the wood grain with the Fleece pad. Use it to buff the Oil Stain dry as well.

4. Drying of the first coat takes about 12 hours. At lower temperatures or higher humidity, drying takes longer. Ensure good ventilation with windows and doors open.

5. The surface must be finished with Hardwax-Oil Original Clear. With 1 coat of Oil Stain, apply 2 coats of Hardwax-Oil. Roll the Hardwax-Oil thinly with the Osmo microfibre roller, always along the wood grain.

Read the instructions for Osmo Hardwax-Oil Original carefully before use.

6. The drying time of Hardwax-Oil Original Clear is about 8-12 hours.

Prefer an intensely coloured look? Then see the instructions for an opaque effect.

Note:

– Cloths used to apply or buff off the Oil Stain must be rinsed with water because they carry a risk of spontaneous combustion. Always rinse cloths with water before throwing them in the bin.

– For surfaces already treated with Osmo or another brand or product, always do a test first.

The appearance and adhesion of our products may vary by wood species, surface and application method. We therefore recommend testing products on a sample first.

1. Stir the product well for 2 minutes. After opening the tin, the oil and wax are separated.

For a 0.5 L tin, shake the product well for 2 minutes.

2. Apply the first coat of Oil Stain with a white pad, Easy Pad or lint-free cloth to the new or sanded wood.

3. Within 20 minutes, buff off excess product along the wood grain with the Fleece pad. Use it to buff the Oil Stain dry as well.

4. Drying of the first coat takes about 12 hours. At lower temperatures or higher humidity, drying takes longer. Ensure good ventilation with windows and doors open.

5. Repeat the process above. Apply a maximum of 2 colour coats.

6. The surface must be finished with Hardwax-Oil Original Clear. With 2 coats of Oil Stain, 1 coat of Hardwax-Oil is sufficient. Roll the Hardwax-Oil thinly with the Osmo microfibre roller, always along the wood grain.

Read the instructions for Osmo Hardwax-Oil Original carefully before use.

7. The drying time of Hardwax-Oil Original Clear is about 8-12 hours.

After treatment with Oil Stain, it is important to maintain your wood properly.

Have you treated a floor or stairs? Then we advise the following: Wisch-Fix is the product to mop and clean your floor or stairs. It contains a small amount of wax that nourishes the wood. We recommend using it weekly or every two weeks.

Over time, walkways and frequently used areas of the surface may start to wear. Liquid Wax Cleaner is then ideal to use.

For annual maintenance, we recommend treating the floor with Osmo Liquid Wax Refresher. Read all about maintaining a wooden floor here.

To clean furniture, you can use Osmo Spray Cleaner.