Skip to Content

Osmo Tuinbeits Outside 0,75L

https://www.easyfloors.net/web/image/product.template/20257/image_1920?unique=6a14085
0.00 € 0.00 € (Tax excluded)

0.00 € / Units
  • Colour code
  • Gemiddeld verbruik
  • Droogtijden
  • Uitstraling
  • Finish
  • Maximale temperatuur
  • Minimale temperatuur
  • Minimaal aantal lagen
  • Verwerkingstijd
  • Overschilderbaar na
  • Bevat pigmenten
  • Schuren tussen lagen
  • Krasbestendig
  • Schrobbestendig
  • Opslagtijd
  • Type oppervlak
Osmo
Finish Zijde-matt
Colour code 7247, Grenen, 7248, Eiken licht, 7249, Teak, 7251, Palissander, 7252, Lariks, 7253, Patina, 7254, Parelgrijs, 7255, Basaltgrijs
Gemiddeld verbruik 16m²
Droogtijden 3-4 uur
Uitstraling Transparent
Maximale temperatuur 30°C
Minimale temperatuur 5°C
Minimaal aantal lagen 2
Verwerkingstijd 0.5 uur
Overschilderbaar na 3-4 uur
Bevat pigmenten Ja
Schuren tussen lagen Ja
Krasbestendig Ja
Schrobbestendig Ja
Opslagtijd 2 jaren
Type oppervlak Hout

Description

Fast-drying – very long lifespan – ideal for outdoor use

Extremely weather-resistant and UV-stable, transparent-tinted, satin wood coating. Osmo Garden Stain is microporous and water-repellent. The dried coat is safe for people, animals and plants (resistant to saliva and perspiration according to DIN 53160, suitable for children's toys according to EN 71.3).

Osmo Garden Stain is best suited to any outdoor wood (except terraces and decking): wooden cladding, balconies, shutters, fences, pergolas, sheds, garden furniture, carports.

Preparation

The wood surface must be clean, dry and frost-free (outdoor temperature 10 °C, max. 18% wood moisture). Osmo Garden Stain is ready to use; do not thin. Stir thoroughly. If possible, apply the first coat to all sides of the wood before installation. Clean and sand old coatings that are still in good condition – remove damaged coatings (sand back). Always wear a dust mask when sanding.

The end result is influenced by various factors, including the condition of the wood. A test is therefore always required, especially on unknown surfaces.


Notes: Many wood species contain water-soluble coloured extractives that can leach out naturally during weathering. The oils and resins in exotic woods and certain hardwoods (teak, Bangkirai, Douglas fir, etc.) must weather before application. This makes the wood absorbent so the finish adheres optimally.

Please note: Harmful to aquatic life with long-lasting effects. If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Avoid release to the environment. Contains benzisothiazolinone (BIT); mixture of chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1) (preservatives). May cause an allergic reaction. EU limit value for this product (Cat A/e): 130 g/l VOC. This product contains max. 30 g/l VOC.

Disposal: Dispose of product residues according to official regulations (EU waste code no. 08 01 12). Only dispose of empty packaging for recycling.