Skip to Content
  1. All Products
  2. Care & treatment
  3. Osmo UV - Beschermingsolie Outside 2,5L
Pricelist: Test 0euro Pricelist

Osmo UV - Beschermingsolie Outside 2,5L

https://www.easyfloors.net/web/image/product.template/52222/image_1920?unique=6a14085
0.00 € 0.00 € (Tax excluded)

0.00 € / Units
  • Colour code
  • Gemiddeld verbruik
  • Brand
  • Uitstraling
  • Finish
  • Maximale temperatuur
  • Minimale temperatuur
  • Minimaal aantal lagen
  • Verwerkingstijd
  • Overschilderbaar na
  • Bevat pigmenten
  • Schuren tussen lagen
  • Krasbestendig
  • Schrobbestendig
  • Vlekbestendig
  • Opslagtijd
Osmo
Finish Zijde-matt
Brand Osmo
Colour code 420, Kleurloos, 424, Spar, 425, Eiken, 426, Lariks, 427, Douglas, 428, Red cedar, 429, Natural, 432, Eiken licht, 431, Zeder natur, 410, Kleurloos zonder actieve stof
Gemiddeld verbruik 18m²
Uitstraling Transparante kleuring, Wet look
Maximale temperatuur 30°C
Minimale temperatuur 10°C
Minimaal aantal lagen 2
Verwerkingstijd 0.5 uur
Overschilderbaar na 12 uur
Bevat pigmenten Ja
Schuren tussen lagen Nee
Krasbestendig Ja
Schrobbestendig Ja
Vlekbestendig Ja
Opslagtijd 5 jaren
Contact Us

Description

UV Protection Oil: the best choice to protect your vertical surfaces

Osmo UV Protection Oil is a product based on oils and waxes that creates a protected surface after treatment. The surface is then resistant to water, dirt and the sun.

Osmo UV Protection Oil for wood protects vertical surfaces against discolouration from the sun, thanks to the UV protector in the product. It is the only clear product on the market with extra protection against UV rays. The product has a protection factor of 12.

Please note: The minimum application temperature is 10 °C.

Vertical surfaces

UV Protection Oil is ideal for all vertical outdoor wooden surfaces such as fences, doors, shutters, windows, carports, façades and garden sheds. UV Protection Oil is not suitable for horizontal wooden surfaces such as terraces. In that case, see Osmo Decking Oil.

UV Protection Oil builds up an invisible layer that protects against UV rays. If water stays on the surface, the oil layer may crack.

UV Protection Oil colours

There are 9 different UV Protection Oil colours in total. Hesitating between a few colours? We have samples of every colour, so you can test on a small piece of wood which colour gives the result you want.

The colours relate to the colours of the wood species they are named after. This does not mean they are only intended for that type of wood.

Wet look

UV Protection Oil 420 Clear contains no colour pigments and therefore enhances the colour of the wood (wet look).

Untreated look

UV Protection Oil 429 Natural is only recommended on light wood species, as it contains a white pigment. On dark substrates, UV Protection Oil 429 may cause a white haze. 429 can be finished with 420 to create an untreated look.

Treating greyed wood

Has the wood turned grey? Then we recommend first treating it with Osmo Power-Gel Wood Reviver, which brings back the natural colour of the wood. Once dry, the wood can be treated with the UV Protection Oil of your choice. We advise waiting 24 hours.

Please note: rough, old or wood that has been outside untreated often absorbs more product, so more UV Protection Oil is needed than recommended. For new wood, we advise letting it weather for at least 4 to 6 weeks first, which makes it more resistant to the outdoor climate. After weathering, the wood can be de-greyed with Osmo Power-Gel Wood Reviver.

Maintenance

After treatment with Osmo UV Protection Oil, it is important to maintain the wood well. Osmo Decking Cleaner is the product to clean your fence, for example. We recommend using it in spring and autumn.

The appearance and adhesion of our products may vary by wood species, surface and application method. We therefore recommend testing products on a sample first.

1. Stir the product well for 2 minutes. After opening the tin, the oil and wax are separated.

2. Apply the first coat of Natural Oil Stain with a brush or block brush to the new or sanded wood.

3. Mistakes made during application can be corrected on the wet surface up to 15 minutes afterwards, such as brush hairs.

4. Drying of the first coat takes about 8-12 hours. At lower temperatures or higher humidity, drying takes longer. Are the surfaces treated indoors first? Then always ensure good ventilation by opening windows and doors.

5. Apply the second coat in the same way as the first coat.

6. Drying in approx. 8-12 hours; see point 4.

After treatment with Osmo Natural Oil Stain, it is important to maintain the wood well. Osmo Decking Cleaner is the product to clean your terrace, decking or fence. We recommend using it in spring and autumn.