Osmo Verf Stripper 6000 Kleurloos 1L

Description

Osmo Paint Stripper is a powerful, low-odour, universal stripper for solvent-resistant substrates. Thanks to its long open time, it can dissolve several layers of lacquer or varnish in one go. The stripper is free from aromatic compounds and chlorinated hydrocarbons and is suitable for removing old layers on both indoor and outdoor wood.

Dissolves and removes synthetic resin lacquers, 1-component lacquers, dispersion and latex paints, oil lacquers and wood stains, dispersion adhesives, polymer plasters, etc. on solvent-resistant substrates (wood, metal, mineral substrates, concrete or stone). It has a mild odour and can therefore be used on large surfaces, both indoors and outdoors.

Always test on a small area first to determine performance, reaction time, substrate compatibility and material requirements! Cover and tape off surfaces not to be treated, plastics (pipes, wiring, windows, etc.) and plants. Wear suitable protective clothing and safety glasses while working.

Approx. coverage: 2-4 m²/1 L

Sizes: 1 L

Instructions for use

1. Stir well; do not thin.

2. Apply generously and evenly with a brush or spatula and immediately cover with a thin film (e.g. polyethylene dust sheets), allowing sufficient reaction time (depending on the project, a few minutes/several hours/possibly overnight).

3. Check the performance now and then with a trowel. Always remove the dissolved layer at the optimal moment.

4. Do not leave Osmo Paint Stripper on the substrate longer than necessary. The reaction time depends on the type of coating, layer thickness and ambient temperature.

5. Remove the soft dissolved layer with a trowel and rinse with water (warm if possible, approx. 40 °C). In some cases, the application may need to be repeated.